Anti-vibration spring isolators with lateral restrain, used for low frequency vibration isolation
Vibro-TRS.F is a specially engineered and designed anti-vibration mount for electrical transformers with transportation rolls. The elastomeric element between the two metal profiles is a high-quality polyurethane vibration isolation foam, manufactured by the German company BSW under the trademark “Regufoam®”, available in different hardness.
The elastometric foam can be produced in two thicknesses (25 and 37mm) in order to achieve better vibration isolation.
The metal plates are protected from oxidation with polyester powder paint or upon request they can be hot dip galvanized.
Rubber pads are added in both sides of the metal profiles in order to avoid any sound bridges. On the upper metal profile, there are two cylindrical axes coated with rubber to keep the wheel in place. The position of these cylindrical axes can be adjusted according to the diameter of the chosen wheel. Also the metal wings of the profile, offer lateral restrain.
The Vibro-TRS.F | Anti-vibration Mount for Transformers is recommended to be used for Vibration isolation for a wide range of transformers.
It can be added as a vibration damping under the transportation rolls of the transformer in order to protect the relative building from the structural born noise transmission.
Our technical department will select the appropriate Vibro-TRS.F | Anti-vibration Mount for Transformers type, according to the transformer technical characteristics and the required vibration reduction. Using our vibration isolation prediction software we can provide the datasheet of deflection (in relation with the load), the natural frequency of the system and the predictable vibration reduction.
TRS.F mount is recommended to be used for Vibration isolation for a wide range of transformers. It can be applied as a vibration damping under the transportation rolls in order to protect the relative building from the structural born noise transmission.
Deflection: Max 4 mm at higher load
Natural Frequency: Up to 15 Hz
Our technical department will select the appropriate TRS.F type, according to the transformer technical characteristics and the required vibration reduction
Some applications of AM_Vibro-TRS.F can be shown below: