Impact noise reduction for timber wooden floors. It is primarily used in gymnasiums, dancing halls, basketball courts but can also be used in domestic applications.
- IMPACT NOISE REDUCTION IN WOODEN FLOORS
Vibro-FS Anti-vibration Rubber Supports is a specially designed homogeneous elastomeric support system that has been developed to reduce the impact noise on wooden floors.
Impact noise refers to sound produced when a short duration impulse, acts directly on a structure.
Vibro-FS vibration protectors offer a high reduction of impact noise from upstairs floors to the levels below.
The floor pads can also prevent the creation of thermal and acoustic bridges.
Also, they improve the insulation of lightweight partitions.
Inside the specially modulated receptor a wooden batten or metal profile of floating walls
(steel frame, metal studs etc.) can be installed and fixed on the lateral flaps with bolts.
Vibro-FS can be fixed on the floor (or the wall) with expansion bolts or inox nails. In every fix
point a metal washer must be used (included). The floor should not lay against the wall, and
for that reason there should be placed the specially designed elastic profile VIBRO-band
should be applied between the floor and the wall.
6-8 Vibro-FS Anti-vibration Rubber Supports per m²
80 daN per mounting point.
Method of Application:
Inside the specially modulated receptor l_l can be installed with wooden batten or metal profile of floating walls (steel frame, metal studs etc.) and fixed on the lateral flaps with bolts. Vibro-FS can be fixed on the floor or the wall with expansion bolts or inox nails.
In every fix points must be used also metal washers.
The floor should not lay on the wall, that is the reason there should be placed the specially designed elastic profile Vibro-band.
Some applications of Vibro-FS can be shown below: